Multiple Use Strand Chucks

Multiple Use Strand Chucks

PSI/PAUL The multiple use strand chuck comes complete with a chuck body, a set of  jaws and a cap and spring. The multiple use strand chuck can be used throughout the stressing operation, however, they must always be used on the jacking end of the form.

The multiple use strand chucks are available in strand sizes .700″, .600″, 9/16″, 1/2″, 7/16″, 3/8″, 5/16″, 1/4″, 7mm, 6mm, 5.2mm, 5mm, 4.8mm, 4mm. Other sizes may be special ordered.

Proper care and maintenance of PSI/PAUL Multiple Use Chucks will extend their service life. Multiple use strand chucks should be cleaned, inspected and lubricated after every use to ensure safety and long service life.

The PSI/PAUL Strand chucks are shipped with a light protective coating on each chuck. We recommend cleaning and lubricating your new chucks before their first use.

TRIPLECH - Multiple Use Strand Chucks


Component Chart

multi chuck parts list

Prestress Supply Inc. and Paul Maschinenfabrik GmbH & Co. agree that mixing different brands of multiple use chucks and parts is highly not recommended as it increases the risk of failure to the components or strand which could result in injury or death.